Skip to content Skip to sidebar Skip to footer

Water Heater Anode Rod Socket Size


Water Heater Anode Rod Socket Size. If you want to extend the life of the water heater. Fit all models for suburban rv water heater (d, de, del, dem models).

The Best Ao Smith Anode Rod Length Cut Shorter Product Reviews
The Best Ao Smith Anode Rod Length Cut Shorter Product Reviews from thedeutschapple.com

First start with the owners manual of your water heater. Remove the plastic cover and unscrew the anode (40) using a 27 mm (or 24 mm) socket wrench. I had the atwood, since it did not need a rod, i added an electric rod heater in the drain hole.

Unfortunately, The Problem Then Becomes The Issue Of The Loose Anode Rod Bouncing Around Inside The Water Heater.


It will cause cracks in the heater's glass lining, allowing the underlying metal to rust and drastically shortening the life of the unit. Titanium anode rod for water heater. That is why i was inquiring about the drain plug size.

The Magnesium Rod Is Larger Because It Can Be Eaten Away Faster;


22 sep 2009 at 1:53pm. The anode rod’s head is offset in its opening atop the water heater, making it essentially. If you want to extend the life of the water heater.

No, All Anode Rods Are Not The Same Size.


What size socket do you need to remove an anode rod? Water scoop 1734 bracket s.s. Be sure to use a 12 drive socket an extension 6 to 12 and a long handled socket wrench or.

The Manual Will Give You Routine Maintenance And Care.


Thanks (0) quote reply posted: You need to remove the drain plug (which is also the anode rod) to drain it. You can see one problem right away:

If You Wish To Check It:


I am not concerned about the 'size' of the anode rod. Anode rods have a life expectancy of about five years, but as always it really. The standard size of an rv anode rod is 9.25″ long & 3/4″ thread.


Post a Comment for "Water Heater Anode Rod Socket Size"